Long Beam: Use the third set of 2 pieces of wood for this. Create 2 using the remaining first 4 pieces of wood. Or, see the following diagrams:ĭrawing 3: examples of leg 1, both sides.ĭiagram 4: measurements for cutting and angles for corner leg 1.Ĭorner Leg 2: Copy the procedures for corner leg 1, creating a mirror image. Mark 1 line, ¾ in away to connect those marks. Mark a measurement of 64.2, ¾ in from edges. This is only one leg, but cuts are made on both sides. Make two of these only.ĭiagram 1: adapted version of measurements for main beam.Ĭorner Leg: Use one of the first 4 wooden pieces. The first is located 1 in from the thickest end and the second is 10 in from that hole, heading towards the thinnest end. Drill two holes with the 3/8 in bit, perpendicular to the beam to carry the axles. Main Beam: Create a taper measuring 13.5 in from end 1 to 0.25 in at center, ending with a 0.5 in at other end.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |